C6X Series PEW Series PE Series

VSI5X Sand Maker

Get Product Quotation

PE jaw crusher (referred to as “smashing”) is a classic performance-stabilized primary crushing device. It has been widely used in metal ore crushing, non-metallic ore crushing, building aggregate crushing, sand making and other fields.

Product features: inheriting a hundred years of classics, simple design structure, reliable performance

Product Catalog (PDF)

working principle

This product is driven by electric motor. The eccentric shaft is driven by the V-belt and the sheave by the motor pulley. The turret is reciprocated according to the predetermined trajectory and will enter the crushing cavity composed of the fixed raft, the movable raft and the side lining. The material is broken and the finished material is discharged through the lower discharge opening.

  • Performance Characteristics
  • Product Parameters

    VSI5X Sand Maker

    On the basis of introducing German technologies on sand-making machines and upgrading the VSI Sand Maker, SBM develops and researches a new generation of sand-making machine--- VSI5X Sand Maker. VSI5X Sand Maker has multiple independent property rights and integrates 3 kinds of crushing modes. Now, VSI5X Sand Maker is the core equipment in machine-made sand industry.

    Chat Online
     

    Working Principle

    VSI5X Vertical-shaft Impact Crusher (also known as “Sand Maker”) has two feed modes – “feed at center” and “feed at center & sides”. As for the former mode “feed at center”, materials at the feed hopper firstly pass through the central hole into the high-speed spinning rotor. In the rotor, materials are fully accelerated and thrown outwards from the launching port to collide with a part of materials that freely fall after rebound. Next, materials hit the surrounding vortex material liner (or the impact block) inside the vortex chamber together. In the chamber, materials are bounced to the top of crushing chamber firstly and then change their direction by moving downwards to form a material curtain with materials emitted from the runner of impeller. Finally, finished products are discharged from the bottom discharge opening. As for the latter mode “feed at center & sides”, firstly, materials at the feed hopper pass through the circular hole. Then, materials are divided into two parts by the distributing tray. One part of materials enter the high-speed rotating impeller while the other part of materials fall from all sides of the tray. Materials in the impeller would be accelerated rapidly and thrown outwards at a high speed to collide with materials falling from all sides of the tray. Next, all materials hit the surrounding vortex material liner (or the impact block) inside the vortex chamber together. In the chamber, materials are bounced to the top of crushing chamber firstly and then change their direction by moving downwards to form a material curtain with materials emitted from the runner of impeller. Finally, finished products are discharged from the bottom discharge opening.

    Characteristics of VSI5X Sand Maker

    Optimized Impeller Enhances Efficiency By 30% And Reduces Wear By 40%

    Through systematic mechanical analysis and verification, SBM optimized the structures of impeller and vulnerable parts. Compared with the traditional sand makers, VSI5X Sand Maker obviously increases the material throughput and ratio of crushing, and enhances the working efficiency by 30%-60%. The wear costs of vulnerable parts reduce by more than 40%.

    Hydraulic Device To Open The Cover Automatically Reduces Maintenance Costs

    In consideration of the maintenance and part replacement during the production of the sand maker, SBM introduced semi-automatic hydraulic system. By only pressing a button, users can open the top cover of the machine to carry out following operations. So, this system greatly saves labor costs and enhances the service efficiency.

    Split-Type Structure, Extended Service Life Of Spare Parts

    Based on the actual situations of production, we found that some spare parts like the periphery guard board and impact block always wear terribly at some specific points. So, to avoid this phenomenon, SBM adopts the split-type structure when designing quick-wear parts, which not only greatly extends service life of quick-wear parts, but also reduces their using costs a lot.

    sand-maker-plant

    Brand New Feed Mode

    In consideration that customers may have two production demands (i.e. sand making and shaping) which require the switch between central feeding and fall feeding, SBM made a brand new improved design on the material distributing tray so that users can easily switch the feed mode, shortening downtime for adjustments.

    Digitalized Processing, Higher Precision

    There are tens of lines of numerical controlling machine tools. Operations such as steel plates’ cutting, bending, planing, milling and paint spraying are all controlled numerically. The machining precision is high, especially for the core parts.

    Sufficient Supply Of Spare Parts, Worry-Free Operation

    SBM, whose businesses cover production and sales, takes responsibility for every machine produced by ourselves. We can offer customers technical services about products and original spare parts to ensure the worry-free operation.

    Technical Data

     

    Relation Products

    •  

    Get Price And Support

    Simply complete the form below, click submit, you will get the price list and a SBM representative will contact you within one business day. Please also feel free to contact us by email or phone. ( * Denotes a required field).

型号 进料口(mm) 进料 (mm) 出料口 (mm) 产量(吨/时) 功率(kw) 外形尺寸(mm)
HGT4265 1065 900 140-175 2015-2875 400 3940×4170×6900
HGT5065 1270 1050 150-175 2400-2940 400 4460×4430×7610
HGT5475 1370 1150 150-200 2890-3490 450 4930×4925×8410
HGT6275 1575 1350 150-200 2895-4335 450 5580×5250×9090
HGT6089 1525 1300 165-230 4200-5810 630 5590×5445×10470
HGT60110 1525 1300 175-250 5540-8895 1250 6200×5940×11390

Product Atlas

Engineering case

Top Rated Products