Impact of large stone block sand machine on equipment and hazards

We all know that each sand making machine has a corresponding particle size range of the crushed material. If the feed strength exceeds the specified maximum value, it will affect the equipment. What are the hazards? The feeding stone has caused serious damage to the sand making machine. Whether it is soft or medium hardness stone, it will cause different damage to the sand making machine. In short, in one case, the feeding stone will accelerate the wear and tear. Degree. According to the equipment description, the production arrangement is the basic premise and guarantee of equipment production efficiency, output and equipment service life. Regular, correct production, well-planned planning and timely maintenance are prerequisites for quality and productivity.

Large pieces of stone enter the sand making machine. Under the same kind of quality, the larger the material size, the more difficult the grinding is, and the more serious the damage to the wearing parts of the sand making machine. The excessive height of the stone will increase the operation burden of the sand making machine, which will easily cause the machine to be exhausted and further increase the equipment failure rate.

sand-machine-on-equipment-and-hazards.jpg

The size of the feed port of each type of sand making machine is specified, so the feed size is clearly defined, and the feeding phenomenon will cause the jamming phenomenon. The feed port jam will cause problems such as material accumulation and low production efficiency. In addition, during the chucking, the breaker of the sand making machine does not stop rotating, and the broken hammer and the crushing roller contact less material, and the direct contact wear of the same material wearing parts is accelerated. Under the same production intensity, the excessive particle size of the feed makes the life cycle of the sand making machine parts shorter, which greatly reduces the service life of the equipment. All of the above are unwilling to see during the use of the sand making machine. How can we avoid this when using it?

When using the sand making machine, the size of the feed material is arranged according to the size of the feed size specified by the different sand making machine models. As long as the material size of the feed inlet is strictly controlled, the above problems can be avoided.

Equipment

F5X1345 Vibrating Feeder
F5X1345 Vibrating Feeder
S5X2460-2 Vibrating Screen
HPT300 Multi-cylinder Hydraulic Cone Crusher
F5X1345 Vibrating Feeder

Equipment